Description:

With the top-rated Lazer Z S-Series of zero-turn rider mowers, you can choose from Kawasaki and Kohler engines, including an eco-friendly, Electronic Fuel Injection (EFI) option. UltraCut™ Series 4 cutting deck sizes available include 52, 60, or 72 inches. And for increased durability, the deck is made of a 10-gauge steel, formed, and continuously seam-welded top and a 7-gauge side skirt. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers. Select Lazer Z S-Series models offer Smart Controller. This easy-to-use interface has a wealth of user data like fuel level, interlock status, PTO and total hours, maintenance reminders, and machine health status. Like our full lineup of zero-turn mowers, the Lazer Z S-Series offers unparalleled durability and precision maneuverability.

Features:

• Less Time At The Pump- Gas-powered S-Series models have a single 12-gallon tank with one fill location.
• On-Board Diagnostics- Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
• Ultracut Series 4 Deck- This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
• Built to Last- Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.
• Fewer Grease Points- With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Specification:

Engine:

• Brand: Kohler
• Model: ECV749
• Displacement: 747 cc
• Series: Command™ EFI
• Speed: 3,750 RPM
• Air Filter: Heavy-duty canister air filtration system
• Fuel Type: Gas EFI
• Fuel Capacity: 12 gallons (45.4 L), single fuel tank with single fill location
• Fuel Indicator: Electronic Sender

Transmission:

• Type: Hydrostatic
• Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter, and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors

Drive:

• Type: Hydro-Drive
• PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
• Drive Wheel Release: Allows unit movement without engine running

Tires:

• Front Caster Tires: 13 x 5.0-6, smooth-tread, semi-pneumatic
• Drive Tires: 23 x 9.50-12, 4-ply Super Turf®

Steering Control:

• Type: Hydraulically dampened twin levers, adjustable fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Adjustable to 2 height positions.

Tractor Frame:

• Construction: Unibody, welded, heavy-duty 1.5" x 3" tubular steel

Deck:

• Width: 52 inches
• Style: Floating Deck
• Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch
• Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt, and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight
• Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat
• Blade Tip Speed: Approximately 18,500 fpm
• Blades: 3 blades, 20.50" length

Blade Spindles:

• Type: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver

Safety:

• Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators
• ROPS: 2-post foldable ROPS standard with seat belt and latch

Additional Features:

• Onboard Intelligence: Smart Controller
• Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up
• Cup Holder: Yes
• Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles or place in transport position
• Carb Compliant: No

Dimensions:

• Width: 64.8 inches (164.6 cm)
• Height: 70.5 inches (179.1 cm)
• Length: 79.2 inches (201.2 cm)
• Curb Weight: 1,136 lbs (515 kg)